The Image - Auto Capture feature allows an operator to toggle between Auto Capture mode and Manual capture mode.  When the Auto Capture mode checkbox  is checked, the system uses a sophisticated image comparison technique to automatically detect when the Presenter has changed a Slide or Image within their presentation.  Once detected the MC-100 automatically captures a the new image.

If the Auto Capture checkbox is unchecked, then Slide changes will not automatically be captured. Instead, the Operator can click the Capture Image button to manually capture a slide change.

The default setting is Auto Capture mode turned on.

To have the MC-100 automatically capture slides:

1.   Click the Auto Capture checkbox

To manually capture a slide:

1.   Uncheck the Auto Capture checkbox (this will enable the Capture Image button)

2.   Click Capture Image once the presenter has changed a slide

Tip: Sometimes captured images may appear a bit blurry or one image may be superimposed slightly over the previous image - in these cases, it is a good practice to uncheck Auto Capture temporarily and Click the Capture Image button to capture a copy of the errant image.  You can then recheck Auto Capture.

Tip: Once recording has stopped, the errant image can easily be deleted while clear image remains.